Fence material list

A 120 ft privacy fence 6 ft tall, posts up to 8 ft apart, takes 16 4×4 posts 10 ft long, 45 2×4 rails, 262 1×6 pickets, 1,572 picket screws, 180 rail screws, 16 post caps and 68 bags of 50 lb fast-setting mix.

Describe the fence once: its sides, height, post spacing, pickets and posts. The list runs the fence calculator on that description and groups what it counts the way a store is laid out, from the lumber yard to the hardware aisle and the concrete, with a link beside each group to the calculator it comes from. Copy it, download it for a spreadsheet, print it, or send the link.

Figures checked by Matt Tay (Tay Tzu Haw)

The fence
ft

Separate sides with commas or plus signs, like 48 + 24 + 24. Leave gate openings out.

Each gate adds one post.

On center. Home Depot and Lowe’s use 6 to 8 ft.

Pickets
Posts
in

Optional. Posts go at least this deep.

120 ft of fence

16 posts · 262 pickets · 68 bags

4×4 posts, 10 ft37 in in the ground, a third of the post, 74 in above it
16
2×4 rails, 8 ft3 per section, 15 sections
45
1×6 pickets, 6 fttouching, over 120 ft
262

An 8 ft post would have only 22 in below ground, less than the 37 in this fence needs.

Picket screws2 where each picket crosses a rail
1,572
Rail screws2 at each end of each rail
180
Post capsone per post
16
Concrete and gravelAdjust concrete and gravel
50 lb bags of fast-setting concrete mix25.5 ft³ around 16 posts, in holes 10 1/2 in wide and 43 in deep
68
Gravel for the bottom of the holes, cubic feet6 in under each post, for drainage
4.8

No extra is added: the post hole calculator, which “Adjust” opens with these holes, adds 10% and makes it 75 bags.

Where the fence doesn’t say, the list assumes: No frost depth to reach; Rails: 2 up to 4 ft tall, 3 above (Home Depot); 50 lb bags of fast-setting mix on 6 in of gravel, no extra.

What each group counts

  • Lumber comes from the fence calculator: one post per section, one more to close an open run and one per gate, each a third in the ground (or down to your frost depth) and bought in even-foot lengths; 2×4 rails, two per section up to 4 ft tall and three above; and the pickets for the whole length at once, touching, spaced or board-on-board.
  • Hardware comes from the same calculator: two screws where each picket crosses a rail, two at each end of each rail, and a cap for each post.
  • Concrete and gravel are the fence calculator’s holes, three times the post’s width and a third of the post deep on 6 in of gravel, filled with 50 lb bags of fast-setting mix. The post hole concrete calculator opens on the same holes.

How to use it

  1. Measure each side along the line the fence will run, and leave the gate openings out. Type the sides one after another: 50 + 100 + 50 for three sides of a yard.
  2. Say whether it closes on itself. A fence all the way round ends at the post it starts from, so it takes one post fewer than an open run.
  3. Check the slope. On sloping ground, the fence slope calculator says how far each panel steps or racks and how tall each post stands.
  4. Copy or download the list and paste it into a quote request, or print it as the order sheet.

Before you dig

Have buried lines marked before digging the post holes, and check your town’s rules on fence height and how far back from the property line a fence must stand.

Questions people ask

What do I need for a 120 ft privacy fence?

Six feet tall in one straight run with posts up to 8 ft apart: 16 4×4 posts 10 ft long, 45 2×4 rails 8 ft long (three per section), 262 1×6 pickets 6 ft long, 1,572 picket screws, 180 rail screws, 16 post caps, and 68 bags of 50 lb fast-setting mix on 4.8 ft³ of gravel for the post holes. Add the gates and the list adds a post for each.

Are the quantities the same as on the fence calculator?

Yes: every line is the fence calculator’s result for this fence, with its defaults for what the list doesn’t ask (rails by the fence’s height, 3 in between spaced pickets, 50 lb bags). “Adjust” beside a group opens that calculator with the fence filled in, and a change there to the fence comes back to the list on this browser. The post hole calculator opens on the same holes and adds 10% extra concrete, as it does by default; the list says what that comes to. From the fence slope calculator the height and post spacing come back, and the run goes there from a fence of one side.

What isn’t on the list?

The gates themselves (their frames, hinges and latches), the extra rails or posts a slope can call for, stain or sealer, and the permit. Pickets, rails and screws are counted for the fence only, with the gate openings left out of the lengths.

How do I price the list?

Press “Add your prices” and type your yard’s price beside each line; the list adds them up, and the copied text and the CSV carry them. The site gives no prices of its own: lumber and hardware prices change by week and by store, and this site only shows figures it can point to a source for. Your prices stay on this device with the fence until you press “Start over”.

Does the list remember my fence?

On this device, yes: the fence is kept in your browser’s local storage, so the fence, fence slope and post hole calculators and this page start from it until you press “Start over”. The link in the address carries the same fence, so it can be sent or bookmarked. Nothing is stored on the site.

Sources for the numbers on this page

  1. The Home Depot: How to build a fence (post spacing, hole depth, rails and pickets) · checked
  2. Lowe’s: How to install a wood fence (post spacing and board-on-board overlap) · checked
  3. Lowe’s: How to lay out and dig a post hole · checked
  4. Lowe’s: Wood fence installation tips: installing posts and pickets (PDF) · checked
  5. UFP Industries: Fence picket installation guide, sold at Lowe’s (PDF) · checked
  6. Quikrete: Setting posts — project instructions · checked
  7. Quikrete: Fast-Setting Concrete Mix No. 1004 — technical data sheet · checked
  8. Quikrete: Concrete Mix No. 1101 — technical data sheet (bag yields, strength gain, curing) · checked
  9. Southern Forest Products Association: Southern Pine standard sizes (nominal and actual dimensions) · checked

Corrections and updates are logged on the sources page.