Deck calculators
9 calculators for building a deck, from the footings to the stain, each with its formula written out and a source for every number.
They share one deck. Describe it on any of them (its size, how it’s framed, which boards) and the others start from it. The deck is kept in your browser and sent nowhere. Once it’s described, the material list turns it into one shopping list.
They’re listed below in the order a deck goes together, so you can work down the page: what holds it up, what you stand on, how you get onto it and what keeps people from falling off, then the finish.
Footings, framing and ledger
Start under the deck. The footing calculator sizes each footing by the residential code’s method, from the deck area each post carries, the live or snow load and your soil, and gives the concrete to pour. The framing calculator lists the joists, ledger, rim, beam plies, posts and blocking cut from stock lengths, with the hangers, ties and nails to fix them. For a deck attached to the house, the ledger calculator gives the ½ in lag screws or bolts the ledger needs and how far apart, from the code’s table for your joist span.
Boards and fasteners
The deck board calculator lays out the rows, picks the board lengths and places the butt joints, with the Trex, TimberTech and Fiberon gaps for the temperature on the day you lay them. The hidden fastener calculator counts the clips, start clips and screws two ways, board by board and from each maker’s published coverage, and gives the boxes to buy.
Stairs and railings
The stair stringer calculator works out the risers, treads, stringer length and how many stringers, with the layout marks, the throat check and the 2024 IRC limits on rise, run and width. The baluster calculator gives how many balusters a deck or stair railing needs and how far apart, with even openings under the 4 in sphere rule (4⅜ in on stairs).
Stain and the shopping list
The stain calculator gives the gallons of stain or sealer for the deck, its stairs and railings, from each product’s published coverage per coat on new or weathered wood. The deck material list puts it all on one shopping list: joists, beam and posts, hangers, footings and concrete, boards and clips, stringers, balusters and stain.
Guides for deck builders
Two details are spelled out exactly by the board makers and the residential code, and each has a guide: the gaps between boards at each installation temperature, and the limits on stair risers, treads, handrails and guards, with the code’s section numbers.
- GuideDeck board spacing: how big a gap?The side, end and wall gaps Trex, TimberTech and Fiberon require at each installation temperature, the wood rule, and why the gaps matter.
- GuideDeck stair code requirementsIRC limits for deck stairs: riser height, tread depth, nosing, width, handrails, guards and baluster spacing on stairs, with the 2024 section numbers.
Before you build
These are estimates for planning and ordering, not engineering. Footings, framing, ledgers, stairs and guards are structural: your plans, your local building code and inspector and, where needed, a licensed engineer override anything here. The code checks follow the International Residential Code, which towns often adopt in an earlier edition or with changes of their own, so ask your building department which rules apply before you buy.
If a number looks wrong for your deck, the sources page shows where each one comes from, and the contact page explains how to report it.