Who makes it
ConcreteCounts is built and maintained by Matt Tay (Tay Tzu Haw), a software engineer based in Malaysia. It started from a simple frustration: most concrete calculators give you a number without saying where it came from, and the numbers don’t always agree. The deck, stair and fence calculators are built the same way.
How the numbers are made
- Every constant — bag yields, densities, bar weights, board widths and gaps, fastener and stain coverage, code limits — comes from a manufacturer’s data sheet or installation guide, an industry association, adopted code text or, for a few fence rules of thumb, a home center’s how-to guide. Each is listed with a link on the sources page.
- The calculation code is tested against published examples, such as Sakrete’s bags-per-post-hole chart, the per-foot volumes on Sonoco’s tube forms, Trex’s deck board count and Home Depot’s stepped-fence example.
- Each calculator and guide shows the date its figures were last checked, and each source the date it was read. The whole site is reviewed at least once a year, and whenever a code edition or a manufacturer’s data sheet changes.
What each calculator shows you
- The formula it uses, written out below the calculator, so you can redo the sum by hand or in a spreadsheet and get the same answer.
- The assumptions behind the result, such as the extra allowed for waste, next to the answer where you can see them and, where it makes sense, change them.
- A drawing of the job built from your inputs on most calculators, so a wrong measurement shows up before you order anything.
- A link to the result: your inputs are kept in the page address, so you can bookmark it or send it to a supplier or crew. You can also print the result or save it as a PDF.
US and Australian versions
The main calculators follow US practice: feet and inches, cubic yards, US bag sizes and the International Residential Code. The Australian section works in metres and cubic metres and uses Australian products and standards, such as SL reinforcing mesh. Most concrete calculators and guides also have a Spanish version.
What it isn’t
These are estimating tools, not engineering. Footing sizes, reinforcement, slab design, deck framing, stairs, guards and anything else structural belong to your plans, your local building code and, where needed, a licensed engineer — they override anything here.
Brand names
The calculators and guides name products — Quikrete, Sakrete, Trex, TimberTech, Fiberon and others — so you can match the numbers to what you buy. The names are their owners’ trademarks. ConcreteCounts isn’t affiliated with or endorsed by any of these companies, and links to them aren’t paid or affiliate links.
How the site is funded
ConcreteCounts is free and supported by advertising. Ads are labeled and kept out of the calculators themselves. Advertisers have no say over what the calculators or guides say.
Corrections
When a number turns out to be wrong or out of date, it’s corrected promptly and the change is logged on the sources page. Found one? Get in touch.