Concrete bag calculator

A 20 kg bag of concrete makes about 0.01 m³: 100 to 110 bags make a cubic metre, by the maker. A 1 × 1 m pad 100 mm thick is 0.1 m³, 10 bags at 100 a cubic metre, or 11 with 10% extra.

Work out how many 20 kg bags of concrete a small slab, path, pad or post hole takes, at the yield printed on your bag, with what they weigh and cost. For a bigger slab with mesh and a ready-mix order, use the slab calculator; for fence and pergola posts, the post hole calculator; for the SL sheets in a slab, the mesh calculator.

Figures checked by Matt Tay (Tay Tzu Haw)

m
m
mm
%

Hunter Readymixed allows 10% for wastage on small jobs.

$

Bunnings, 4 October 2026: Australian Builders High Strength $9.90, Dingo MaxPRO $14.44.

22 20 kg bags

for 0.22 m³ at 100 bags a cubic metre, including 10% extra

Concrete
0.22 m³
At 108 bags a cubic metre
24
At 110 bags a cubic metre
25
Bags to carry
440 kg
Bags at $9.90 each
$218

Bags for a volume

Concrete100 bags a m³108 bags a m³110 bags a m³
0.05 m³566
0.1 m³101111
0.25 m³252728
0.5 m³505455
1 m³100108110

Whole 20 kg bags, before any extra.

Bags for common jobs

JobConcreteAt 100 a m³At 108 a m³At 110 a m³
A 1 × 1 m path, 75 mm thick0.075 m³9910
A 1 × 1 m pad, 100 mm thick0.1 m³111213
A 3 × 1 m path, 75 mm thick0.225 m³252728
A 90 × 90 mm post, 300 mm hole 600 mm deep0.038 m³555
A 100 × 100 mm post, 300 mm hole 900 mm deep0.055 m³777

With 10% extra, as Hunter Readymixed allows on small jobs. The post holes are filled to the top, less the post.

How the bags are worked out

concrete = length × width × thickness (round: π × (diameter ÷ 2)² × depth)order = concrete × (1 + extra%)bags = order × bags a m³, rounded up

Every maker states how many of its 20 kg bags make a cubic metre; choose the figure on your bag. The calculator shows the other makers’ counts beside it, since the difference is a bag or two in every hundred.

Questions people ask

How many 20 kg bags of concrete make a cubic metre?

100 to 110, by the maker’s data sheet: 100 for Australian Builders High Strength and Easy Mix Concrete, 108 for Boral Concrete Mix and Dingo MaxPRO, and 110 for Cement Australia’s PROSTRENGTH Rapid Set. So a bag makes about 0.01 m³, or 10 litres.

How many bags of concrete for a 1 m² slab?

At 100 mm thick, 0.1 m³: 10 bags at 100 a cubic metre, or 11 with 10% extra. A path 75 mm thick, CCAA’s least for foot traffic, takes 8, or 9 with the extra.

Is it cheaper to buy bags or ready-mix?

At $9.90 a bag and 100 bags a cubic metre, bagged concrete costs about $990 a cubic metre before mixing. Ready-mix is ordered in 0.1 m³ steps, and small loads carry a short-load fee, so the slab calculator works out both for your job.

Sources for the numbers on this page

  1. Building Products Supplies (Australian Builders): High Strength Concrete 20 kg, product data sheet: about 100 bags make a cubic metre (PDF) · checked
  2. River Sands (Easy Mix): Easy Mix Concrete, data sheet (March 2020): 0.01 m³ a 20 kg bag · checked
  3. Boral: Concrete Mix 20 kg, product data sheet (February 2022): 108 bags make a cubic metre · checked
  4. Bunnings: Dingo 20kg MaxPRO Concrete Mix: 108 bags make a cubic metre ($14.44) · checked
  5. Cement Australia: PROSTRENGTH Rapid Set Concrete, data sheet (April 2024): about 110 bags a cubic metre (PDF) · checked
  6. Bunnings: Australian Builders 20kg High Strength Concrete Mix ($9.90) · checked
  7. Hunter Readymixed Concrete: Ordering concrete (in 0.1 m³ steps, with 10% for wastage on small jobs) · checked
  8. Cement Concrete & Aggregates Australia: Residential concrete driveways and paths, data sheet (August 2026, PDF) · checked

Corrections and updates are logged on the sources page.